Product Description
customized conveyor,powder vacuum conveyor,air vacuum conveyor
The vacuum suction equipment uses a vacuum pump to generate a vacuum, and the negative pressure sucks the material out of the feeding port. Then, the air is separated from the material in the filtration chamber of the separation container. The material automatically falls due to gravity and is collected in the silo.
Our cyclone separator prevents fine powder from entering the filter to improve the efficiency of the filter. When the silo is filled with materials, the vacuum pump will automatically shut down and the pressure inside the conveying equipment will reach equilibrium. When the discharge valve is opened, the material flows out through the discharge port and directly falls into the storage container. When unloading, the filter element is automatically cleaned by a blowback airbag. After the feeding is completed, the discharge bin will automatically close and the entire conveying process will restart.
Product Parameters
Model
Parameter |
FX-14 |
FX-33 |
FX-56 |
| Valume(L) |
14 |
33 |
56 |
| Power(W) |
200 |
200 |
200 |
| Compressed air consumption/pressure(L/min)/Mpa |
100/0.6 |
100/0.6 |
200/0.6 |
| Vacuum pumping interface |
Quick installation 2inch |
Quick installation 3inch |
Quick installation 4inch |
| Feeding interface |
Quick installation 2inch |
Quick installation 3inch |
Quick installation 4inch |
| Production Capacityt/h |
2.5-5.5 |
4-7 |
6-8 |
| Weight(kg) |
37 |
40 |
65 |
| Overall dimensions(mm)D*H |
φ400*1000 |
φ400*1250 |
φ650*1350 |
Notice:
1,not containing the power of matched vacuum pump and its electrical appliances.
2,not containing the consumption of compressed air which used by vacuum generator.
3, This parameter assumed on the condition of ≤5meter's distance when the flour is conveying.
Main Structures
The main structure of our company's vacuum suction machine is shown in Figure 1, including the upper head, filter element component, and middle buffer
It consists of six parts: storage, discharge valve, control box, clamp, and sealing ring. It has the following characteristics:
a. Automatic cleaning of filter element
b. Simple structure, easy operation and maintenance, low noise, and effective elimination of material static electricity
c. Closed transportation throughout the entire process, eliminating environmental pollution
d. Complies with GMP requirements, material is 304 or 316L
Characters
1. Closed transportation, no dust leakage, no cross contamination;
2. Comply with GMP standards, meet CIP requirements, and provide sterile products;
3. Modular design, eliminating dead corners, quick and convenient disassembly and cleaning;
4. Effectively solve the layering phenomenon of powder particles;
5. Effectively eliminate material static electricity, without causing pollution to the surrounding environment;
6. Automatic control, simple and convenient operation;
7. No heat generated during work, safe and explosion-proof;
8. No vibration, low noise, high performance, energy-saving, and low operation and maintenance costs.
In-Service
Customer reference
Application
Certification
){kind=link}
){kind=link}