| Customization: | Available |
|---|---|
| Capacity(t/h): | 150-300 |
| Motor Power(kw): | 1~10 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Keywords: loss in weight feeder, Twin screw feeder, Single Screw Feeder, Gravimetric Feeders, Powder Transfer System, Weigh Feeders, plastic pellet extruder, plastic powder dosing feeder, loss in weight screw feeding system, Volumetric feeders
The loss in weight Feeder is a critical component often employed in plastic extruder systems to ensure precise material handling and feed accuracy.
The control of a Loss in Weight Feeder is done through a feedback loop from the signal of the load cells to the speed of the motor. The signal of the load cells is sampled over very short interval of times in order to calculate the rate of discharge of the product. If the throughput is lower than expected the dosing equipment speed, for instance a screw conveyor, is increased. If it is too high, the dosing equipment is tuned to a lower capacity.
Single Screw Feeder Parameters
| Item(with/without stiring ) | Feeding Capacity | Power | Standard Hopper Volume |
| RX-WS30/BL-WSR30 | 1-30 | 0.37 | 16 |
| RX-WS46/BL-WSR46 | 20-400 | 0.75 | 60 |
| RX-WS70/BL-WSR70 | 100-800 | 1.5 | 80 |
| RX-WS100/BL-WSR100 | 300-1500 | 2.2 | 120 |
| Notice: The feeding capacity here is measured under the condition of material density 0.5g/cm³ | |||
Single screw volumetric feeder
1. Perfectly suited for granules, recycled materials, flakes, and powders with excellent fluidity
2. The optimally designed screw is easy to install and disassemble, ensuring no material build-up at its base
3. A variety of feeding screws are available to cater to different material types
4. Choice of drive motor: variable frequency motor or servo motor
5. Optional horizontal and vertical stirring devices effectively eliminate material bridging issues
6. The feeding component is designed for easy disassembly, cleaning, replacement, and maintenance
7. Material contact surfaces constructed from 304/316 stainless steel
8. Seals made from silicone rubber, nitrile rubber, or polytetrafluoroethylene
9. Customizable hopper volume for varied applications
10. Aluminum transmission box for enhanced heat dissipation
){kind=link}