Factory Customized Low Operating Cost Tube Drag Chain Conveyor in Feed Industry

Product Description

Product Description

Tube chain conveyor is the best solution for transporting powder, granular material, fibrous or fragile block, good or poor fluidity, cold or hot, wet or dry, flammable and explosive materials in a gentle, dust-proof, efficient and three-dimensional space flexible way. Tubular drag chain conveyor is a conveyor system that can be customized according to customer needs, which can meet the specific needs of each user, including many industries such as medicine, food, grain, chemical industry, and new energy. Pipe Chain Conveyor is easy to use, low maintenance costs and small footprint, making it the best choice for material conveying equipment.

Characteristics

1.Multiple entries and exits. In a crowded factory environment, multi-point feeding and multi-point unloading enable very flexible operations.
2.Three dimensional transmission. The traditional need for two or three conveyors can often be accomplished with just one tube chain conveyor. The conveying capacity of the bent pipe allows the conveyor to pass through layouts that require changing direction, thereby saving valuable space.
3.Gentle transfer. The material transferred between two transportation disc is moved as a whole, so that there is almost no turbulence during transportation. Only a small percentage comes into contact with the pipe wall, thereby minimizing the possibility of abrasive degradation to the greatest extent possible.
4.Refuse to raise dust. The tubular chain conveyor is completely enclosed, and its dust-proof design makes it an obvious candidate for handling and containing dust, odors, toxic and even hazardous substances.
5.Energy saving. The conveyor is a high torque/low speed device. This not only means that it is very energy efficient and uses less energy than other types of conveyors, but also allows them to start with load.
6.Easy maintenance. The tube conveyer machine is mainly driven by chains to drive the movement of materials through transportation discs, simple structure, easy maintenance, regular observation and maintenance of the transportation disc and unit lubrication are all needed to maintain the long-term stable operation of the equipment.

Product Parameters

Model	Motor Power KW	linear velocity M/S	Speed R/min	Conveying capacity M³/H	Max Torque N·M	Max Tensile force N	Notice
PC-80	4.0	0.30	20.7	3.9	1810	1300	Low speed maximum pulling force reaches 1.5 tons
		0.40	24.9	4.7	1504	1090
PC-100	5.5	0.30	17.5	6.0	2943	1800	Low speed maximum pulling force reaches 2 tons
		0.40	23.4	7.0	2200	1350
PC-150	7.5	0.30	13.4	13.7	5240	2450	Low speed maximum pulling force reaches 3 tons
		0.40	17.9	18.2	3923	1840
PC-200	11.0	0.30	11.4	27.4	9034	3590	Low speed maximum pulling force reaches 4 tons
		0.40	15.2	36.5	6776	2700

Common troubleshooting

Fault	Reason	Elimination method
Chain rolling out of sprocket	The chain is too loose or too tight	Adjust the tightness of the chain
	Chain twist	Find out the reason, make it untwist
	Chain wear	Replace
	Drive sprocket wear	Replace
	Foreign objects inside the tube	Exclude
	Wrong conveying direction	Swap the two poles of the motor
Conveyer not runing	Power off	Check the power supply
	Inverter overcurrent alarm	Find the cause of overload
	Chain break switch closed	Check the conveyor chain , adjust the position of switch
	The alarm light is on	Check the chain break switch Check the status of the frequency converter Check if the emergency stop has been pressed
	Residual blockage	Open the conveyor to eliminate
	Material overload	Clear materials
	Motor fault	Professional personnel for maintenance or replacement

Application

Certifications

 

Customer

Company Profile