Working Principle
Feeding Station
The feeding station effectively isolates material dust and powder produced during feeding from the human body, operating under the negative pressure conditions created by the fan.
Dust is extracted into the filtration system, separating gas from material through advanced filtering methods to block dust particles present in the dusty gases.
Dust particles are trapped on the fabric of the filter bag, purifying the gas. The feeder boasts a simple structure, low investment cost, and seamless operation.
The feeder is simple and reliable, requiring low technical expertise for management and maintenance.
The feeding station is ideal for unpacking and feeding operations across industries such as medicine, food, chemicals, plastics, rubber, and more.
Technical Parameter
| Model |
RX-WT100 |
RX-WT150 |
RX-WT200 |
RX-WT300 |
| Volume(L) |
100 |
150 |
200 |
300 |
| Power(KW) |
0.8 |
2 |
2 |
2 |
| Noise(dB) |
70 |
80 |
80 |
80 |
| 0.6MPaCompressed air consumption(L/min) |
5 |
5 |
5 |
5 |
| Discharge interface |
DN150 |
DN200 |
DN200 |
DN250 |
| Dust removal fan exhaust interface |
φ100 |
φ100 |
φ100 |
φ100 |
| Weight(Kg) |
About170 |
About 200 |
About 220 |
About 240 |
| Overall dimensions |
800*900*1800 |
900*1000*2200 |
1150*1300*2000 |
850*1100*2600 |
| (mm L×W×H) |
| Rated parameters of power supply |
380V/50Hz,Three phase five wire power supply |
| Short circuit rated current SCCR(KA) |
6 |
| Other power source parameters |
The feeding station requires the use of dry and clean compressed air,Pressure≤0.6MPa.Required pressure dew point-20ºC,Dust content 5.0mg/m³(Particle size 5μm),oil content 1.0mg/m³ |
Product Configuration
CustomerSite
Product Features
The dust generated during feeding is effectively isolated from the human body and the environment. Under fan-induced negative pressure, dust is sucked into the filtration system. Upon reaching the set time, it is cleaned by compressed air back-blowing into the silo. This equipment offers easy operation, observation, maintenance, and cleaning, reducing operational intensity, enhancing the production environment, and improving product quality. It can be constructed from SS304/316L material, ensuring long-lasting durability.
Common Troubleshooting
In case of a malfunction in the dust-free feeding station, please follow the below procedures for initial troubleshooting:
| Fault phenomenon |
Fault cause |
Troubleshooting |
| No backflushing |
The compressed air valve is not open |
Open the compressed air valve |
| Pulse valve malfunction |
Check pulse valve |
| Filter clogged |
Replacing the filter element |
| No electric vibration |
Damaged vibration motor |
Replace the vibration motor |
| The vibration motor is not powered on |
Connect the power supply to the vibration motor |
| Slow or no fan extraction |
Fan damage |
Replacing the fan |
| Filter clogged |
Replacing the filter element |
If the fault persists after following the prescribed methods, contact our sales team promptly for a swift diagnosis and resolution of the issue.
Application Industry
Dust-Free Feeding Station
Product Application Scope: food industry, pharmaceutical industry, metallurgy and mining industry, chemical industry.
Materials: essence, monosodium glutamate, adsorbent, catalyst, graphite, rouge, powder blusher, polyethylene, polypropylene, polyoxyethylene, fertilizer, veterinary medicine, feed, premix, additives, laundry powder, salt, monosodium glutamate, chicken essence, white sugar, seeds.
Customer Reference
Certificate
){kind=link}