Working principle
Feeding station
The feeding station is engineered to effectively isolate material dust and powder from the human body during feeding, operating under the fan's negative pressure conditions.
Dust is extracted into the filtration system where gases and materials are separated. Advanced filtering methods are employed to block dust particles in the dusty gases.
Dust is retained on the fabric bags to purify the gas. The feeder boasts a simple structure, low investment costs, and ease of operation.
Simple, reliable, and requiring minimal technical management for maintenance.
The feeding station is ideal for unpacking and feeding in industries like medicine, food, chemicals, plastics, and rubber.
Technical Parameter
| Model |
RX-WT100 |
RX-WT150 |
RX-WT200 |
RX-WT300 |
| Volume(L) |
100 |
150 |
200 |
300 |
| Power(KW) |
0.8 |
2 |
2 |
2 |
| Noise(dB) |
70 |
80 |
80 |
80 |
| 0.6MPaCompressed air consumption(L/min) |
5 |
5 |
5 |
5 |
| Discharge interface |
DN150 |
DN200 |
DN200 |
DN250 |
| Dust removal fan exhaust interface |
φ100 |
φ100 |
φ100 |
φ100 |
| Weight(Kg) |
About170 |
About 200 |
About 220 |
About 240 |
| Overall dimensions |
800*900*1800 |
900*1000*2200 |
1150*1300*2000 |
850*1100*2600 |
| (mm L×W×H) |
| Rated parameters of power supply |
380V/50Hz,Three phase five wire power supply |
| Short circuit rated current SCCR(KA) |
6 |
| Other power source parameters |
The feeding station requires the use of dry and clean compressed air,Pressure≤0.6MPa.Required pressure dew point-20ºC,Dust content 5.0mg/m³(Particle size 5μm),oil content 1.0mg/m³ |
Product configuration
CustomerSite
Product Features
Material dust generated during feeding is efficiently isolated from both the human body and the external environment. The dust is sucked into the filtration system under fan-induced negative pressure, and later back-washed into the silo using compressed air. This equipment offers ease of operation, observation, maintenance, and cleaning, reducing operational intensity, improving the production environment, and enhancing product quality. Available in SS304/316L material for superior durability and longevity.
Common troubleshooting
In case of a malfunction in the dust-free feeding station, please follow the troubleshooting steps listed below:
| Fault phenomenon |
Fault cause |
Troubleshooting |
| No backflushing |
The compressed air valve is not open |
Open the compressed air valve |
| Pulse valve malfunction |
Check pulse valve |
| Filter clogged |
Replacing the filter element |
| No electric vibration |
Damaged vibration motor |
Replace the vibration motor |
| The vibration motor is not powered on |
Connect the power supply to the vibration motor |
| Slow or no fan extraction |
Fan damage |
Replacing the fan |
| Filter clogged |
Replacing the filter element |
If the problem persists after following the prescribed steps, please contact our sales team to quickly diagnose and resolve the issue.
Application Industry
Dust free feeding station
Product application scope extends to the food industry, pharmaceutical industry, metallurgy and mining industry, and chemical industry.
Materials handled include essence, monosodium glutamate, adsorbent, catalyst, graphite, rouge, powder blusher, polyethylene, polypropylene, polyoxyethylene, fertilizer, veterinary medicine, feed, premix, additives, laundry powder, salt, monosodium glutamate, chicken essence, white sugar, and seeds.
Customer Reference
Certificate
Audited Supplier 
){kind=link}